日本神鋼KOBELCO NO65G氬弧焊絲ER70S-2進口焊絲

更新日期：2024年06月14日
有效期：360天
瀏覽次數：

價格：￥1
供貨總量：1888
規格：2.4
所屬行業：五金工業品-> 機械設備-> 焊割設備與材料
關鍵字：NO65G焊絲 NO65G日本神鋼焊絲 NO65G進口焊絲

【想采購，免費發布采購需求】

李金柱

點擊詢盤

手機查看

商家資料

濟南駿焊焊材有限公司

聯系人：李金柱
部門：銷售部
職位：經理
電話：

手機：

地址：中國山東濟南市市中區禮拜寺街1號副樓

進入商鋪

在線留言

主營：

焊接材料五金電料進口焊條

企業其他產品更多>>

￥1
ERNiCrMo-3鎳鉻鉬焊絲ERNiCr...

山東濟南市
￥1
414N-O軋輥耐磨堆焊焊絲明弧...

山東濟南市
￥1
E551T8-Ni2-JH8管道焊絲E81T...

山東濟南市

產品詳情
聯系方式

日本神鋼KOBELCO NO65G氬弧焊絲ER70S-2進口焊絲

NO65G TIG rod, equivalent to AWS A5.18 ER70S-2, contains less C, Si and Mn contents than TG-S50 or TG-S51T; instead, Al, Ti and Zr are specially added. These elements help to decrease the amount of oxygen in the molten pool, allowing NO65G to provide a weld metal of relatively high cleanness. On the other hand, it is a little inferior to TG-S50 or TG-S51T in terms of fluidity of molten metal, bece of which its surface tension increases while the oxygen content in the molten metal is decreased.

Bece Al, Ti or Zr is an element with high oxygen affinity, slag can be generated on the bead surface after a part of the elementbines with oxygen in the molten metal during welding.ers are therefore advised to beware of weld defects, such as poor bead appearance or slag incion, ced by the slag.

Each chemical element in NO65G rod is strictly controlled to maintain a narrow range within the AWS A5.18 ER70S-2 specification so that it can meet the tough requirements set out by Japanese clients for mechanical properties in critical structural projects.

Table 8: Typical chemistry of weld metal (mass%)濟南駿焊

C	Si	Mn	P	S	Cu	Al	Ti	Zr
0.04	0.50	1.20	0.007	0.012	0.22	0.06	0.05	0.02

Table 9: Typical mechanical properties of weld metal

	Tensile test at RT			Absorbed energy (J)
	YS (MPa)	TS (MPa)	EI (%)	-40°C	-30°C	-20°C
As-welded	584	635	29	Av 165	Av 200	Av 215
625°C × 8hr	545	615	30	Av 138	Av 160	Av 175

Table 8, Table 9 and Figure 5 show the typical chemistry of NO65G weld metal, the typical mechanical properties in as-welded and PWHT (625°C×8 hr) conditions and the absorbed energies in relat ion to the tes t temperatures, respectively.

Figure 5: Impact properties of weld metal

Figures 6 and 7 show face side bead appearance after root and second passes and back bead appearance after root-pass welding in 1G and 3G (uphill) s by NO65G (2.4mm dia.), respectively. Figures 8 and 9 exhibit macro-structures of root-pass and second-pass welding in 1G and 3G (uphill) s, respectively. The groove configuration was of single 60°V, with a root gap of 3.0-3.5mm. The welding conditions were 110A-12V for root-pass without back-shielding and 160A-13V for second pass welding, respectively.

上一個：進口D-100Mo德國明弧藥芯焊絲

下一個：Avesta 347-16焊條阿維斯塔進口不銹鋼焊條

聯系方式

濟南駿焊焊材有限公司